Microcement Finishing PURE (Lime Base) 15 Kg

PURE Finishing is a Microcement (Lime Base) finish that is applied after the PURE Base Microcement (Lime Base).

PURE Finishing, unlike PURE Traffic, has a more natural look, which makes it an elegant coating that will hardly go unnoticed thanks to its nuances, marbling and spatulas. Microcement always has to be sealed with Lime Sealer to guarantee a perfect end result, as does its waterproofing, and can have the following finishes: Matt, Satin or Gloss.

Mixture:

15 kg PURE Finishing - 6.4 L Lime Resin

Yield:

2 coats - 0.5 kg/m²

How to make the mixture

1 - Pour the Lime Resin corresponding to the recommended values into an empty container.

2 - Stir the Pigment and mix it with the Lime Resin until a homogeneous liquid is obtained.

3 - Gradually pour PURE Finishing Microcement (Lime Base) into the container with the Lime Resin while mixing mechanically for 2 to 3 minutes until a homogeneous solution is obtained.

Application process

- Apply over PURE Base

- Apply with a metal trowel

- All coats must be pigmented.

Working time

Once the mortar has been prepared, it takes about 1.5 hours, depending on the ambient temperature and humidity.

Sealing

Once dry, PURE Finishing (Lime Base) should always be sealed with Lime Sealer. This should not have a humidity level of more than 5%.