Microcement Base PURE (Lime Base) 20 Kg

PURE Base is a two-component lime-based microcement, a more ecological and environmentally friendly product, with lower CO2 emissions in its manufacture. It has been formulated to be applied as a thin continuous coating on floors and walls. It stands out for its handmade finish, workability and extreme hardness. It is applied by trowel in several layers, allowing a wide variety of effects to be achieved, such as tadelakt finishes or exposed concrete.

Before starting to apply PURE Base Microcement (Lime Base) it is necessary to prepare the surface according to its specific requirements: degreasing, vacuuming, vapour barrier, etc.

PURE Base Microcement (Lime Base) is applied before PURE Finishing or PURE Traffic. It is usually applied in two coats, which is a necessary condition for obtaining a good result from the microcement system (Lime Base).

PURE Base can be used as a finish by applying two more coats, creating a rustic finish.

When preparing your PURE Base Microcement (Lime Base) it is necessary to mix it with Lime Resin and Pigment in the recommended proportions.

Substrate Preparation:

Before applying Microcement finishing is necessary to prepare the surface with Microcement base. Application support must be clean and free of grease, the base should be consolidated and in good condition surveying.

Mixture:

20 kg PURE Base - 6.7 L Lime Resin

Yield:

2 coats - 1.4 kg/m²

How to make the mixture

1- Pour the Lime Resin corresponding to the recommended values into an empty container.

2- Stir the Pigment and mix it with the Lime Resin until a homogeneous liquid is obtained.

3- Gradually add PURE Base Microcement into the container with the Lime Resin while mixing mechanically.

4- Mix for 3 minutes until a homogeneous solution is obtained.

Application process

- Apply PURE Base Microcement to smooth, levelled and degreased surfaces.

- 2 to 3 coats, sanding between each coat. (100 grit)

- Apply with a metal trowel.

- All coats should be pigmented.